ceramic bandpass filter IFD08332 part no. IFD08332 rev. date 2014-08-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 1/4 features ceramic bandpass filter 50 single-ended operation surface mounted module package ( 38mm 22mm 7mm ) package dimensions maximum ratings parameter unit minimum typical maximum operating temperature range -40 25 85 storage temperature range -40 25 85 power handling capability watt - - 3 electrostatics sensitive device ( esd )
ceramic bandpass filter IFD08332 part no. IFD08332 rev. date 2014-08-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 2/4 specifications fo = 836.5mhz notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 3) all attenuation measurements are measured relati ve to insertion loss minimum typical maximum unit center frequency ( fo ) - 836.5 - mhz insertion loss (824~ 849mhz) - 2.7 3.0 db amplitude ripple (824~ 849mhz) - 0.3 0.5 db vswr (824~ 849mhz) - 1.3 1.5 - relative attenuation @ 766.5 mhz @ 869 mhz 1950 ~ 2140 mhz 65.0 40.0 65.0 68.0 45.0 68.0 - - - db input/output impedance 50 ohm
ceramic bandpass filter IFD08332 part no. IFD08332 rev. date 2014-08-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 3/4 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout and parasitics )
ceramic bandpass filter IFD08332 part no. IFD08332 rev. date 2014-08-29 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 4/4 typical performance ( at 25 )
|